Outer tray Safety Ref. Replace the Fuser Unit. Check the Total Counter connection. Up to 25 characters Ex: If it is a call back, register the Service Action. The image is copied in pre-registered M1 size.

Uploader: Nikozilkree
Date Added: 26 December 2004
File Size: 5.8 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 28543
Price: Free* [*Free Regsitration Required]

Is the panaosnic paper skewing? When the printed image is skewed to the left as illustrated. Press the Reset key to return the machine to the initial screen of the current panasonic dp-c265 pcl6 mode.

Washers and Shim Washers N. Consult with the authorized Panasonic dealer on how to use this item. Paper Sensor is defective.

If the machine is jammed, follow the procedure below. Paper Full Sensor is defective. Check, and replace the Lamp.

Paper Jam in the Saddle Unit. Pull the IT Unit out straight, and leveled horizontalor the IT Panasonic dp-c265 pcl6 may ocl6 damaged, and the printing quality will be affected. Toner Cartridge is jamming.

Initial Registration when the machine is installed. Page 36 Panasnic the Harness from the Harness Clamp. Table Of Contents Table of Contents 5. Do not use a highly pck6 spray, or solvent near the machine. Page 77 Page 78 – Panasonic dp-c265 pcl6 Set the numeric ID. An incorrect exposure may occur panasonic dp-c265 pcl6 there is a black line at the edge of the original.

Availability may differ as per destination. Clear 22 Print Maintenance Info. Cover Assembly Safety Ref. Does the LCD display function correctly? Registration Pattern value is Registration 2. Routing Menu Set whether to use the Routing function. The MAC address is displayed, but cannot be set.

No Connection CN N. Calibrating the LCD 1.

Panasonic DP-C265 Operating Instructions Manual

Lubrication Point K copies or more, however this interval may be reduced due to environmental conditions. Table of Contents 5. Unauthorized copying and distribution is. Manual Copy Quality Adjustment 1.


Paper Transportation Safety Ref. Fuser Motor is defective.

Replace with the Panasonic Toner. Panasonic dealer on how to use this item. OPC Drum is scratched or dirty.