DRIVER FOR RICOH SP 200S DDST

There are two ways to resolve this error: Continue printing using mismatched paper Use the form-feed function to ignore the error and print using mismatched paper. To print the manual completely, please, download it. Original Type key Use this key to select the type of original. Guide To Components 1. If paper is jammed in the bypass tray input area, remove the jammed paper carefully.

Uploader: Murn
Date Added: 19 February 2011
File Size: 28.39 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 1539
Price: Free* [*Free Regsitration Required]

Message area Displays the status of this machine with a message. Replace the print cartridge if the printed image suddenly becomes pale or blurred. Placing Originals, About Originals 2.

SP 200S/SP 202SN

If copying is canceled during printing, the photocopy process is canceled after the current page has been printed out. Maintaining the Machine Slide the print cartridge in horizontally, and then slowly ricoh sp 200s ddst it in all the way. Guide To Components 1.

CTT Slide the side guides ricoj, load paper with the print side up, and then push in until it stops against the machine. Continue printing using ricoh sp 200s ddst paper Use the form-feed function to ignore the error and print using mismatched paper. Canceling A Copy 4. The actual procedure may vary depending on the operating system you are using.

Appendix Moving and Transporting the Machine This section provides cautions that you must follow when moving the machine both short and long distances. CTT Within 30 ricoh sp 200s ddst, place the original back side down with the top to the rear of the machine on the exposure ddsst, and then press the [Start] key.

Maintaining the Machine Cleaning the 2000s of the Machine Open the front cover, and then carefully lower it.

Select Mode Up to ten scan settings can be saved. Original Scan Method Specify the method to scan originals.

RICOH SP S DDST driver free download for windows – Dell Inc. – OptiPlex

Copied pages are too dark or too Adjust the image density. Page rjcoh Loading Paper Pinch the end paper guide and slide it inward to match the standard size.

The program backs the development and dissemination of products that feature energy saving functions. Carefully pull out the print cartridge horizontally, holding its center.

Adjusting Image Density There are three image density levels.

Ricoh Downloads – SP S

2000s Loading Paper, Supported Paper 2. The default value is applied when [Default] is selected. Possible Cause Solution There is a problem with the Make sure that the machine is on a level surface. Environmental Advice For Ricoh sp 200s ddst For details about the return program, please refer to the Web page below or consult your service person.

Memory 16 MB Power requirements Image area Displays the status of this machine with an icon.

Ricoh SP 200s Operating Instructions Manual

Loading Paper Print Area The diagram below shows the area of the paper that the machine can ricoh sp 200s ddst on. Smart Organizing Monitor provides the following functions: Release the extender locks on both sides so the tray, and then pull out the extender.

Using 200d Organizing Monitor 6. Loading Paper Loading Paper Load a stack of paper for printing in the input tray. Guide to the Machine Printer Problems Print Positions Do Not Match Display Positions If the position of items on the printed page differs from the position displayed on the computer screen, the cause may be ricoh sp 200s ddst of the following.

Use paper that has been stored properly. Paper Feed Problems 8. Scanning from a Computer 7.